{"title":"Fuel Hose \u0026 Fittings","description":"\u003cp\u003eFuel Hose \u0026amp; Fittings for boats, RVs and outdoor use. Brands include Trident Marine and Attwood Marine. Every listing shows the manufacturer's exact part number — match it to your original part or your equipment's parts list before ordering.\u003c\/p\u003e","products":[{"product_id":"trident-marine-305-0386-fuel-hose-fittings","title":"Trident Marine 305-0386 3\/8\" x 50' Boxed Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray","description":"\u003cp\u003e\u003cstrong\u003e3\/8\" x 50' Boxed Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis hose is built with the best fuel and age-resistant formulations and a unique \"Barrier Liner\" on the inside surface of the tube, so the fuel is not in direct contact with rubber. This greatly reduces fuel permeation and prevents ethanol degradation of the rubber tube, which can cause small pieces of rubber to reach and damage the engine. That is particularly important considering the prospect of higher ethanol blends (E-15) available at gas stations next year. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e: \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides extraordinary resistance to fuel permeation, aging, heat, cold, and ozone  \u003c\/li\u003e\n\u003cli\u003eAlso, provides excellent rope-like bend-ability and fitting retention\u003c\/li\u003e\n\u003cli\u003eFor both gasoline (including ethanol blends up to E85) and diesel (including bio diesel blends up to 100%)\u003c\/li\u003e\n\u003cli\u003eEPA Certified and CARB Executive Order for low permeation Type B1-15\u003c\/li\u003e\n\u003cli\u003eNMMA Type Accepted \u0026amp; CE certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose for distribution, return, vent and transfer\u003c\/li\u003e\n\u003cli\u003eFor all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube: Fluoroplastic Internal Barrier\u003c\/li\u003e\n\u003cli\u003eCover: Gray CPE Rubber\u003c\/li\u003e\n\u003cli\u003eReinforcement: 2-Spiral Polyester Plies \u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-28ºC to 100ºC)\u003c\/li\u003e\n\u003cli\u003eLength: 50’ (15m) Boxed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 3\/8\" \/ (mm) 9.50\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 0.588 \/ (mm) 14.9\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: (psi) 175 \/ (mpa) 1.21\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 35 \/ (mpa) 0.24\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 4\" \/ (mm) 101.6\u003c\/li\u003e\n\u003cli\u003eWeight: (lb\/100 ft.) 10.5 \/ (kg\/m) 0.156\u003c\/li\u003e\n\u003cli\u003ePermeation Rate (Standard is (15g\/m^2\/24hrs (CE10)): 5.0\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #305 series exceeds ABYC H-24, SAE J1527, ISO 8469 B1, USCG Type B1-15\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Trident Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 305-0386\u003c\/li\u003e\n\u003cli\u003eUPC: 704917018065\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/98799QG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eQuick guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46276415619141,"sku":"CWR-TRID-305-0386-Q1-1","price":182.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/98799XL.jpg?v=1793733726"},{"product_id":"trident-marine-321-2125-fuel-hose-fittings","title":"Trident Marine 321-2125 2-1\/2\" x 25' Ocean-Flex Multipurpose Hose","description":"\u003cp\u003e\u003cstrong\u003e2-1\/2\" x 25' Ocean-Flex Multipurpose Hose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis unique marine hose can be used for a multitude of applications for both Commercial and Recreational Vessels including Fuel Fill, Feed, and Vent (Diesel \u0026amp; Gasoline – Type A1), Lube Oil, Wet Exhaust, Water (Vital and Non-Vital), Bilge, Coolant, Drains, and Sanitation applications. OCEAN-FLEX boasts compliance with the following standards: USCG Inspected Vessels (Title 46 CFR Sub-Chap. T), SAE J1942 (Code F, VW, NVW), USCG Type A1, SAE J1527 A1 R2, SAE J2006 R2, SAE J20R2 B, SAE J20R4 B, SAE J20R5 B, SAE J30R5, ABYC H-22, H-24, H-33 P-1, P-4, ISO 7840 A1, ISO 8469 B1, ISO 13363 2B, and CE.\u003c\/p\u003e\u003cp\u003eProvides excellent resistance to fuel, fire, heat, cold, ozone, and aging. Also provides excellent bend-ability and adheres to more standards than any other marine hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstruction: Tube Black Nitrile, Cover Black Nitrile\u003c\/li\u003e\n\u003cli\u003eReinforcement: Multiple Textile Spirals, Dual Steel Wire Helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-29ºC to 100ºC)\u003c\/li\u003e\n\u003cli\u003eLengths: 12.5’ (3.81 m) Length, 25’ (7.62 m) Coil (4”–6”), 50’ (15.24 m) Coil (up to 3-1\/2” ID.)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Trident Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 321-2125\u003c\/li\u003e\n\u003cli\u003eUPC: 704917018799\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/107208QG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eQuick guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46276418469957,"sku":"CWR-TRID-321-2125-Q1-1","price":959.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/107208XL.jpg?v=1793733732"},{"product_id":"attwood-marine-8884-6-fuel-hose-fittings","title":"Attwood Marine 8884-6 Attwood Chrysler Female Hose Fitting - 3\/8\" Barb","description":"\u003cp\u003e\u003cstrong\u003eChrysler Female Hose Fitting - 3\/8\" Barb\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis Attwood Chrysler Engine Fuel Hose Fitting provides for the precise and effective installation of a fuel line to a Chrysler-brand engine. This Fuel Hose Fitting is a female fitting that connects to the engine end of the fuel line. The fitting has a 3\/8-inch barb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides precise installation of a fuel line to a Chrysler-brand engine\u003c\/li\u003e\n\u003cli\u003eConnects on the engine end of the fuel line\u003c\/li\u003e\n\u003cli\u003eMaterial Construction: Chrome-plated Brass\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*Specifically mates to Attwood part number: 14509-6\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Attwood Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 8884-6\u003c\/li\u003e\n\u003cli\u003eUPC: 022697888433\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/98236QG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eQuick guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":46276427776069,"sku":"CWR-ATTW-2551008-Q1-1","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/98236XL.jpg?v=1793733750"},{"product_id":"attwood-marine-8873-6-fuel-hose-fittings","title":"Attwood Marine 8873-6 Attwood Mercury Tank Fitting - 1\/4\" NPT Thread","description":"\u003cp\u003e\u003cstrong\u003eMercury Tank Fitting - 1\/4\" NPT Thread\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConnect your tank and fuel lines with confidence; solid machined brass construction holds up to lead, unleaded, and alcohol-based fuels. Specifically designed for Mercury\/Mariner Brand engines and tanks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid machined brass for dependable performance, peace of mind\u003c\/li\u003e\n\u003cli\u003eQuick-connect ¼-inch male thread makes installation easy\u003c\/li\u003e\n\u003cli\u003eExtremely Versatile: Designed for leaded, unleaded, and alcohol-blended fuel\u003c\/li\u003e\n\u003cli\u003e1\/4\" NPT (National Pipe Thread)\u003c\/li\u003e\n\u003cli\u003eSpecifically designed for Mercury\/Mariner Brand engines and tanks\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*Specifically mates to Attwood part number: 8890LP6\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Attwood Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 8873-6\u003c\/li\u003e\n\u003cli\u003eUPC: 022697088734\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/98221QG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eQuick guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":46276437573701,"sku":"CWR-ATTW-2546990-Q1-1","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/98221XL.jpg?v=1793733770"},{"product_id":"trident-marine-327-1126-fuel-hose-fittings","title":"Trident Marine 327-1126 1-1\/2\" x 50' Coil Type A2 Fuel Fill Hose","description":"\u003cp\u003e\u003cstrong\u003e1-1\/2\" x 50' Coil Type A2 Fuel Fill Hose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTrident 1-1\/2\" ID A2 fuel fill hose for gasoline (including ethanol blends) and diesel (including bio diesel blends). \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThis hose is built with the best fuel, fire, and age-resistant formulation \u003c\/li\u003e\n\u003cli\u003eProvides extraordinary resistance to aging, fire, heat, cold, and the ozone \u003c\/li\u003e\n\u003cli\u003eAlso, provides excellent bend-ability\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose for fill and vent plus diesel distribution\u003c\/li\u003e\n\u003cli\u003eApproved, for all marine fuels including gasoline, alcohol blends, diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube \u0026amp; Cover: NBR \/ Neoprene \u003c\/li\u003e\n\u003cli\u003eReinforcement: High tenacity polyester 2 spiral, spring steel helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-20ºC to 100ºC) \u003c\/li\u003e\n\u003cli\u003eLength: 50 ft. (15.24 m) Coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 1\/2\" \/ (mm) 38\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 2 \/ (mm) 51\u003c\/li\u003e\n\u003cli\u003eWall: (inch) 0.25 \/ (mm) 6.4\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 60 \/ (mpa) 0.41\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 5.5\" \/ (mm) 140\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #327 series exceeds ABYC H-24 \u0026amp; H-33, SAE J1527, ISO 7840, \u0026amp; USCG Type A2; and is NMMA Type Accepted, CE certified, and Lloyds Registry Type Approved\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Trident Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 327-1126\u003c\/li\u003e\n\u003cli\u003eUPC: 704917009056\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/98953QG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eQuick guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46276438392901,"sku":"CWR-TRID-327-1126-Q1-1","price":643.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/98953XL.jpg?v=1793733771"},{"product_id":"attwood-marine-14540-6-fuel-hose-fittings","title":"Attwood Marine 14540-6 Attwood Universal Brass Fuel Hose Fitting - 1\/4\" NPT x 3\/8\" Barb","description":"\u003cp\u003e\u003cstrong\u003eUniversal Brass Fuel Hose Fitting - 1\/4\" NPT x 3\/8\" Barb \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis Attwood Fuel Tank Fitting is a dependable replacement for original equipment and provides a sure connection in a fuel line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels\u003c\/li\u003e\n\u003cli\u003eMaterial Construction: Brass\u003c\/li\u003e\n\u003cli\u003eMale thread, hose barb\u003c\/li\u003e\n\u003cli\u003e(inch) Male 1\/4\" NPT x 3\/8\" Barb \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*Use thread sealant on all threads\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Attwood Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 14540-6\u003c\/li\u003e\n\u003cli\u003eUPC: 022697145406\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/98326QG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eQuick guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":46276440948805,"sku":"CWR-ATTW-14540-6-Q1-1","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/98326XL.jpg?v=1793733777"},{"product_id":"trident-marine-321-2006-fuel-hose-fittings","title":"Trident Marine 321-2006 2\" x 50' Ocean-Flex Multipurpose Hose","description":"\u003cp\u003e\u003cstrong\u003e2\" x 50' Ocean-Flex Multipurpose Hose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis unique marine hose can be used for a multitude of applications for both Commercial and Recreational Vessels including Fuel Fill, Feed, and Vent (Diesel \u0026amp; Gasoline – Type A1), Lube Oil, Wet Exhaust, Water (Vital and Non-Vital), Bilge, Coolant, Drains, and Sanitation applications. OCEAN-FLEX boasts compliance with the following standards: USCG Inspected Vessels (Title 46 CFR Sub-Chap. T), SAE J1942 (Code F, VW, NVW), USCG Type A1, SAE J1527 A1 R2, SAE J2006 R2, SAE J20R2 B, SAE J20R4 B, SAE J20R5 B, SAE J30R5, ABYC H-22, H-24, H-33 P-1, P-4, ISO 7840 A1, ISO 8469 B1, ISO 13363 2B, and CE.\u003c\/p\u003e\u003cp\u003eProvides excellent resistance to fuel, fire, heat, cold, ozone, and aging. Also provides excellent bend-ability and adheres to more standards than any other marine hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul style='box-sizing: border-box; border: 0px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-variant-numeric: inherit; font-variant-east-asian: inherit; font-variant-alternates: inherit; font-variant-position: inherit; font-variant-emoji: inherit; font-weight: 400; font-stretch: inherit; font-size: 14px; line-height: inherit; font-family: -apple-system, BlinkMacSystemFont, \"Segoe UI\", Roboto, \"Helvetica Neue\", Arial, sans-serif, \"Apple Color Emoji\", \"Segoe UI Emoji\", \"Segoe UI Symbol\"; font-optical-sizing: inherit; font-size-adjust: inherit; font-kerning: inherit; font-feature-settings: inherit; font-variation-settings: inherit; margin: 0px; padding: 0px; vertical-align: baseline; list-style: inside disc; color: rgb(33, 37, 41); letter-spacing: normal; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;'\u003e\n\u003cli\u003eConstruction: Tube Black Nitrile, Cover Black Nitrile\u003c\/li\u003e\n\u003cli\u003eReinforcement: Multiple Textile Spirals, Dual Steel Wire Helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-29ºC to 100ºC)\u003c\/li\u003e\n\u003cli\u003eLengths: 12.5’ (3.81 m) Length, 25’ (7.62 m) Coil (4”–6”), 50’ (15.24 m) Coil (up to 3-1\/2” ID.)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Trident Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 321-2006\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/107204QG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eQuick guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46276453597253,"sku":"CWR-TRID-321-2006-Q1-1","price":1447.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/107204XL.jpg?v=1793733802"},{"product_id":"trident-marine-365-0386-fuel-hose-fittings","title":"Trident Marine 365-0386 3\/8\" x 50' Boxed Low Permeation Type A1-15 Fuel Line Hose - Black","description":"\u003cp\u003e\u003cstrong\u003e3\/8\" x 50' Boxed Low Permeation Type A1-15 Fuel Line Hose - Black\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTrident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation, and a unique \"Barrier Liner\" on the inside surface of the tube, so fuel is not in direct contact with rubber.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone \u003c\/li\u003e\n\u003cli\u003eAlso provides excellent bend-ability\u003c\/li\u003e\n\u003cli\u003eNMMA Type Accepted \u0026amp; CE certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose (distribution, return, vent and transfer)\u003c\/li\u003e\n\u003cli\u003eFor all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube: Nylon Internal Barrier, NBR \u003c\/li\u003e\n\u003cli\u003eCover: NBR\/PVC Blend \u003c\/li\u003e\n\u003cli\u003eReinforcement: Polyester 2 spiral \u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-28ºC to 100ºC) \u003c\/li\u003e\n\u003cli\u003eLength: 50 ft. (15 m) Boxed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 3\/8\" \/ (mm) 9.50\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 0.681 \/ (mm) 17.3\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: (psi) 400 \/ (mpa) 2.76\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 100 \/ (mpa) 0.69\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 2\" \/ (mm) 50.8\u003c\/li\u003e\n\u003cli\u003eWeight: (lb\/100 ft.) 15.6 \/ (kg\/m) 0.233\u003c\/li\u003e\n\u003cli\u003ePermeation Rate: \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #365 series exceeds ABYC H-24 \u0026amp; H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Trident Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 365-0386\u003c\/li\u003e\n\u003cli\u003eUPC: 704917010571\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/98796QG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eQuick guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46276475256901,"sku":"CWR-TRID-365-0386-Q1-1","price":194.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/98796XL.jpg?v=1793733844"},{"product_id":"trident-marine-365-0566-fuel-hose-fittings","title":"Trident Marine 365-0566 5\/16\" x 50' Boxed Low Permeation Type A1-15 Fuel Line Hose - Black","description":"\u003cp\u003e\u003cstrong\u003e5\/16\" x 50' Boxed Low Permeation Type A1-15 Fuel Line Hose - Black\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTrident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation and a unique \"Barrier Liner\" on the inside surface of the tube, so fuel is not in direct contact with rubber.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone \u003c\/li\u003e\n\u003cli\u003eAlso provides excellent bend-ability\u003c\/li\u003e\n\u003cli\u003eNMMA Type Accepted \u0026amp; CE certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose (distribution, return, vent and transfer)\u003c\/li\u003e\n\u003cli\u003eFor all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube: Nylon Internal Barrier, NBR \u003c\/li\u003e\n\u003cli\u003eCover: NBR\/PVC Blend \u003c\/li\u003e\n\u003cli\u003eReinforcement: Polyester 2 spiral \u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-28ºC to 100ºC) \u003c\/li\u003e\n\u003cli\u003eLength: 50 ft. (15 m) Boxed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 5\/16\" \/ (mm) 7.92\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 0.611 \/ (mm) 15.5\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: (psi) 400 \/ (mpa) 2.76\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 100 \/ (mpa) 0.69\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 1.75\" \/ (mm) 44.5\u003c\/li\u003e\n\u003cli\u003eWeight: (lb\/100 ft.) 13.3 \/ (kg\/m) 0.198\u003c\/li\u003e\n\u003cli\u003ePermeation Rate: \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #365 series exceeds ABYC H-24 \u0026amp; H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Trident Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 365-0566\u003c\/li\u003e\n\u003cli\u003eUPC: 704917010564\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/98797QG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eQuick guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46276475682885,"sku":"CWR-TRID-365-0566-Q1-1","price":194.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/98797XL.jpg?v=1793733845"},{"product_id":"attwood-marine-93806hus7-fuel-hose-fittings","title":"Attwood Marine 93806HUS7 Attwood Honda Fuel Line Kit - 3\/8\" Diameter x 6' Length","description":"\u003cp\u003e\u003cstrong\u003eHonda Fuel Line Kit - 3\/8\" Diameter x 6' Length\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis EPA-certified Attwood Honda Fuel Line Kit reliably delivers fuel to your Honda engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3\/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThese Attwood Hose Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8900-6\u003c\/li\u003e\n\u003cli\u003eHose and tank fittings come with pre-applied thread sealant\u003c\/li\u003e\n\u003cli\u003eThere’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance\u003c\/li\u003e\n\u003cli\u003eFor Honda engines and tanks\u003c\/li\u003e\n\u003cli\u003eThis Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*No Fuel Demand Valve is included in this kit\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Attwood Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 93806HUS7\u003c\/li\u003e\n\u003cli\u003eUPC: 022697938220\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/98220QG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eQuick guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":46276491903045,"sku":"CWR-ATTW-93806HUS7-Q1-1","price":92.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/98220XL.jpg?v=1793733875"},{"product_id":"trident-marine-321-1126-fuel-hose-fittings","title":"Trident Marine 321-1126 1-1\/2\" x 50' Ocean-Flex Multipurpose Hose","description":"\u003cp\u003e\u003cstrong\u003e1-1\/2\" x 50' Ocean-Flex Multipurpose Hose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis unique marine hose can be used for a multitude of applications for both Commercial and Recreational Vessels including Fuel Fill, Feed, and Vent (Diesel \u0026amp; Gasoline – Type A1), Lube Oil, Wet Exhaust, Water (Vital and Non-Vital), Bilge, Coolant, Drains, and Sanitation applications. OCEAN-FLEX boasts compliance with the following standards: USCG Inspected Vessels (Title 46 CFR Sub-Chap. T), SAE J1942 (Code F, VW, NVW), USCG Type A1, SAE J1527 A1 R2, SAE J2006 R2, SAE J20R2 B, SAE J20R4 B, SAE J20R5 B, SAE J30R5, ABYC H-22, H-24, H-33 P-1, P-4, ISO 7840 A1, ISO 8469 B1, ISO 13363 2B, and CE.\u003c\/p\u003e\u003cp\u003eProvides excellent resistance to fuel, fire, heat, cold, ozone, and aging. Also provides excellent bend-ability and adheres to more standards than any other marine hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstruction: Tube Black Nitrile, Cover Black Nitrile\u003c\/li\u003e\n\u003cli\u003eReinforcement: Multiple Textile Spirals, Dual Steel Wire Helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-29ºC to 100ºC)\u003c\/li\u003e\n\u003cli\u003eLengths: 12.5’ (3.81 m) Length, 25’ (7.62 m) Coil (4”–6”), 50’ (15.24 m) Coil (up to 3-1\/2” ID.)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Trident Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 321-1126\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/107198QG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eQuick guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46276526211141,"sku":"CWR-TRID-321-1126-Q1-1","price":1176.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/107198XL.jpg?v=1793733939"},{"product_id":"trident-marine-305-0566-fuel-hose-fittings","title":"Trident Marine 305-0566 5\/16\" x 50' Boxed Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray","description":"\u003cp\u003e\u003cstrong\u003e5\/16\" x 50' Boxed Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis hose is built with the best fuel and age-resistant formulations and a unique \"Barrier Liner\" on the inside surface of the tube, so fuel is not in direct contact with rubber. This greatly reduces fuel permeation and prevents ethanol degradation of the rubber tube, which can cause small pieces of rubber to reach and damage the engine. That is particularly important considering the prospect of higher ethanol blends (E-15) available at gas stations next year. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides extraordinary resistance to fuel permeation, aging, heat, cold, and ozone  \u003c\/li\u003e\n\u003cli\u003eAlso, provides excellent rope-like bend-ability and fitting retention\u003c\/li\u003e\n\u003cli\u003eFor both gasoline (including ethanol blends up to E85) and diesel (including bio diesel blends up to 100%)\u003c\/li\u003e\n\u003cli\u003eEPA Certified and CARB Executive Order for low permeation Type B1-15\u003c\/li\u003e\n\u003cli\u003eNMMA Type Accepted \u0026amp; CE certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose for distribution, return, vent and transfer\u003c\/li\u003e\n\u003cli\u003eFor all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube: Fluoroplastic Internal Barrier\u003c\/li\u003e\n\u003cli\u003eCover: Gray CPE Rubber\u003c\/li\u003e\n\u003cli\u003eReinforcement: 2-Spiral Polyester Plies \u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-28ºC to 100ºC)\u003c\/li\u003e\n\u003cli\u003eLength: 50’ (15m) Boxed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 5\/16\" \/ (mm) 7.92\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 0.500 \/ (mm) 12.7\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: (psi) 175 \/ (mpa) 1.21\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 35 \/ (mpa) 0.24\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 2.5\" \/ (mm) 63.5\u003c\/li\u003e\n\u003cli\u003eWeight: (lb\/100 ft.) 7.8 \/ (kg\/m) 0.116\u003c\/li\u003e\n\u003cli\u003ePermeation Rate (Standard is (15g\/m^2\/24hrs (CE10)): 5.0\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #305 series exceeds ABYC H-24, SAE J1527, ISO 8469 B1, USCG Type B1-15\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Trident Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 305-0566\u003c\/li\u003e\n\u003cli\u003eUPC: 704917018058\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/98800QG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eQuick guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46276527980613,"sku":"CWR-TRID-305-0566-Q1-1","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/98800XL.jpg?v=1793733942"},{"product_id":"trident-marine-321-1126-ft-fuel-hose-fittings","title":"Trident Marine 321-1126-FT 1-1\/2\" Ocean-Flex Multipurpose Hose - Sold by the Foot","description":"\u003cp\u003e\u003cstrong\u003e1-1\/2\" Ocean-Flex Multipurpose Hose - Sold by the Foot\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis unique marine hose can be used for a multitude of applications for both Commercial and Recreational Vessels including Fuel Fill, Feed, and Vent (Diesel \u0026amp; Gasoline – Type A1), Lube Oil, Wet Exhaust, Water (Vital and Non-Vital), Bilge, Coolant, Drains, and Sanitation applications. OCEAN-FLEX boasts compliance with the following standards: USCG Inspected Vessels (Title 46 CFR Sub-Chap. T), SAE J1942 (Code F, VW, NVW), USCG Type A1, SAE J1527 A1 R2, SAE J2006 R2, SAE J20R2 B, SAE J20R4 B, SAE J20R5 B, SAE J30R5, ABYC H-22, H-24, H-33 P-1, P-4, ISO 7840 A1, ISO 8469 B1, ISO 13363 2B, and CE.\u003c\/p\u003e\u003cp\u003eProvides excellent resistance to fuel, fire, heat, cold, ozone, and aging. Also provides excellent bend-ability and adheres to more standards than any other marine hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul style='box-sizing: border-box; border: 0px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-variant-numeric: inherit; font-variant-east-asian: inherit; font-variant-alternates: inherit; font-variant-position: inherit; font-variant-emoji: inherit; font-weight: 400; font-stretch: inherit; font-size: 14px; line-height: inherit; font-family: -apple-system, BlinkMacSystemFont, \"Segoe UI\", Roboto, \"Helvetica Neue\", Arial, sans-serif, \"Apple Color Emoji\", \"Segoe UI Emoji\", \"Segoe UI Symbol\"; font-optical-sizing: inherit; font-size-adjust: inherit; font-kerning: inherit; font-feature-settings: inherit; font-variation-settings: inherit; margin: 0px; padding: 0px; vertical-align: baseline; list-style: inside disc; color: rgb(33, 37, 41); letter-spacing: normal; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;'\u003e\n\u003cli\u003eConstruction: Tube Black Nitrile, Cover Black Nitrile\u003c\/li\u003e\n\u003cli\u003eReinforcement: Multiple Textile Spirals, Dual Steel Wire Helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-29ºC to 100ºC)\u003c\/li\u003e\n\u003cli\u003eLengths: 12.5’ (3.81 m) Length, 25’ (7.62 m) Coil (4”–6”), 50’ (15.24 m) Coil (up to 3-1\/2” ID.)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003e  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Trident Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 321-1126-FT\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/107199QG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eQuick guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46276544168005,"sku":"CWR-TRID-321-1126-FT-Q1-1","price":53.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/107199XL.jpg?v=1793733975"},{"product_id":"trident-marine-327-2006-ft-fuel-hose-fittings","title":"Trident Marine 327-2006-FT 2\" Type A2 Fuel Fill Hose - Sold by the Foot","description":"\u003cp\u003e\u003cstrong\u003e2\" Type A2 Fuel Fill Hose - Sold by the Foot\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTrident 2\" ID A2 fuel fill hose for gasoline (including ethanol blends) and diesel (including bio diesel blends). \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold by the foot\u003c\/li\u003e\n\u003cli\u003eThis hose is built with the best fuel, fire, and age-resistant formulation \u003c\/li\u003e\n\u003cli\u003eProvides extraordinary resistance to aging, fire, heat, cold, and the ozone \u003c\/li\u003e\n\u003cli\u003eAlso, provides excellent bend-ability\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose for fill and vent plus diesel distribution\u003c\/li\u003e\n\u003cli\u003eApproved, for all marine fuels including gasoline, alcohol blends, diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube \u0026amp; Cover: NBR \/ Neoprene \u003c\/li\u003e\n\u003cli\u003eReinforcement: High tenacity polyester 2 spiral, spring steel helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-20ºC to 100ºC)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 2\" \/ (mm) 50.8\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 2.48 \/ (mm) 63.5\u003c\/li\u003e\n\u003cli\u003eWall: (inch) 0.25 \/ (mm) 6.4\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 50 \/ (mpa) 0.345\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 7.0\" \/ (mm) 178\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #327 series exceeds ABYC H-24 \u0026amp; H-33, SAE J1527, ISO 7840, \u0026amp; USCG Type A2; and is NMMA Type Accepted, CE certified, and Lloyds Registry Type Approved\u003c\/p\u003e\u003cstrong\u003e  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Trident Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 327-2006-FT\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/99618QG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eQuick guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46276553539653,"sku":"CWR-TRID-327-2006-FT-Q1-1","price":48.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/99618XL.jpg?v=1793733991"},{"product_id":"trident-marine-327-2006-fuel-hose-fittings","title":"Trident Marine 327-2006 2\" x 50' Coil Type A2 Fuel Fill Hose","description":"\u003cp\u003e\u003cstrong\u003e2\" x 50' Coil Type A2 Fuel Fill Hose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTrident 2\" ID A2 fuel fill hose for gasoline (including ethanol blends) and diesel (including bio diesel blends). \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThis hose is built with the best fuel, fire, and age-resistant formulation \u003c\/li\u003e\n\u003cli\u003eProvides extraordinary resistance to aging, fire, heat, cold, and the ozone \u003c\/li\u003e\n\u003cli\u003eAlso, provides excellent bend-ability\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose for fill and vent plus diesel distribution\u003c\/li\u003e\n\u003cli\u003eApproved, for all marine fuels including gasoline, alcohol blends, diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube \u0026amp; Cover: NBR \/ Neoprene \u003c\/li\u003e\n\u003cli\u003eReinforcement: High tenacity polyester 2 spiral, spring steel helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-20ºC to 100ºC) \u003c\/li\u003e\n\u003cli\u003eLength: 50 ft. (15.24 m) Coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 2\" \/ (mm) 50.8\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 2.48 \/ (mm) 63.5\u003c\/li\u003e\n\u003cli\u003eWall: (inch) 0.25 \/ (mm) 6.4\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 50 \/ (mpa) 0.345\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 7.0\" \/ (mm) 178\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #327 series exceeds ABYC H-24 \u0026amp; H-33, SAE J1527, ISO 7840, \u0026amp; USCG Type A2; and is NMMA Type Accepted, CE certified, and Lloyds Registry Type Approved\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Trident Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 327-2006\u003c\/li\u003e\n\u003cli\u003eUPC: 704917009124\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/98954QG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eQuick guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46276579917893,"sku":"CWR-TRID-327-2006-Q1-1","price":1011.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/98954XL.jpg?v=1793734046"},{"product_id":"trident-marine-317-0586-fuel-hose-fittings","title":"Trident Marine 317-0586 5\/8\" x 50' Boxed Type A2 Fuel \u0026 Vent Line Hose - Black","description":"\u003cp\u003e\u003cstrong\u003e5\/8\" x 50' Boxed Type A2 Fuel \u0026amp; Vent Line Hose - Black\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTrident 5\/8” A2 Fuel Hose for gasoline vent hose (including ethanol blends) and diesel (including bio diesel blends). This hose is built with the best fuel, fire and age resistant formulation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides extraordinary resistance to aging, fire, heat, cold, and the ozone \u003c\/li\u003e\n\u003cli\u003eAlso provides excellent bend-ability\u003c\/li\u003e\n\u003cli\u003eNMMA Type Accepted \u0026amp; CE certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFuel Hose for vent and diesel distribution \u003c\/li\u003e\n\u003cli\u003eFor all marine fuels including gasoline, alcohol blends, diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube: Nylon Internal Barrier, NBR \u003c\/li\u003e\n\u003cli\u003eCover: NBR\/PVC Blend \u003c\/li\u003e\n\u003cli\u003eReinforcement: Polyester 2 spiral \u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-28ºC to 100ºC) \u003c\/li\u003e\n\u003cli\u003eLength: 50 ft. (15 m) Boxed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 5\/8\" \/ (mm) 15.9\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 0.960 \/ (mm) 24.4\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: (psi) 200 \/ (mpa) 1.38\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 50 \/ (mpa) 0.34\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 3\" \/ (mm) 76.2\u003c\/li\u003e\n\u003cli\u003eWeight: (lb\/100 ft.) 25.84 \/ (kg\/m) 11.72\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #317 series exceeds ABYC H-24 \u0026amp; H-33, SAE J1527, ISO 7840, \u0026amp; USCG Type A2\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Trident Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 317-0586\u003c\/li\u003e\n\u003cli\u003eUPC: 704917009001\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/98798QG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eQuick guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46276598169669,"sku":"CWR-TRID-317-0586-Q1-1","price":233.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/98798XL.jpg?v=1793734164"},{"product_id":"attwood-marine-93806yus7-fuel-hose-fittings","title":"Attwood Marine 93806YUS7 Attwood Yamaha Fuel Line Kit 6' x 3\/8\"","description":"\u003cp\u003e\u003cstrong\u003eYamaha Fuel Line Kit 6' x 3\/8\"\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAttwood's low-permeation fuel line kits set the standard in performance, safety, and value. Along with featuring Attwood's award-winning Universal Sprayless Connector, these kits meet strict United States EPA regulations. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating \u0026amp; pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes Attwood's award-winning Universal Sprayless Connector; no more dangerous fuel sprays when connecting and disconnecting pressurized lines\u003c\/li\u003e\n\u003cli\u003eMulti-layer low-permeation primer bulb with 60% more fuel output compared to competitors\u003c\/li\u003e\n\u003cli\u003eIncludes 3\/8-inch low-permeation fuel hose that resists kinking and hardening; rated up to 100 degrees Centigrade\u003c\/li\u003e\n\u003cli\u003eVersatile: compatible with Ethanol blended fuels, Yamaha Brand engines and tanks\u003c\/li\u003e\n\u003cli\u003eAttwood products are both compatible and reliable, engineered and built with a never-fail attitude\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Attwood Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 93806YUS7\u003c\/li\u003e\n\u003cli\u003eUPC: 022697938640\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":46276613734469,"sku":"CWR-ATTW-93806YUS7-Q1-1","price":92.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/86420XL.jpg?v=1793734233"},{"product_id":"attwood-marine-93806mus7-fuel-hose-fittings","title":"Attwood Marine 93806MUS7 Attwood Mercury Fuel Line Kit - 3\/8\" Diameter x 6' Length (1998 \u0026 Newer)","description":"\u003cp\u003e\u003cstrong\u003eMercury Fuel Line Kit - 3\/8\" Diameter x 6' Length (1998 \u0026amp; Newer)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your Mercury engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3\/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. It also includes a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThese Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and hose fitting engine end 8896LP6\u003c\/li\u003e\n\u003cli\u003eUniversal for any engines and tanks\u003c\/li\u003e\n\u003cli\u003eIn-Line Fuel Demand Valve\u003c\/li\u003e\n\u003cli\u003eThe kit also has a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Attwood Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 93806MUS7\u003c\/li\u003e\n\u003cli\u003eUPC: 022697938626\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/98213QG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eQuick guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":46276614127685,"sku":"CWR-ATTW-93806MUS7-Q1-1","price":92.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/98213XL.jpg?v=1793734234"},{"product_id":"attwood-marine-93806uusd7-fuel-hose-fittings","title":"Attwood Marine 93806UUSD7 Attwood Universal Fuel Line Kit - 3\/8\" Dia. x 6' Length with Sprayless Connectors \u0026 Fuel Demand Valve","description":"\u003cp\u003e\u003cstrong\u003eUniversal Fuel Line Kit - 3\/8\" Diameter x 6' Length with Sprayless Connectors \u0026amp; Fuel Demand Valve\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3\/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Award-winning Universal Sprayless Connector (hose and tank fittings with pre-applied thread sealant) are included as well. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThese Attwood Fittings Are Included: Tank fitting 8838TM6 \u0026amp; tank end hose fitting 8838HF6\u003c\/li\u003e\n\u003cli\u003eAlso, includes a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine\u003cul\u003e\u003cli\u003eTank Side: Universal Sprayless Quick-Connect\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eUniversal for any Engines and Tanks\u003c\/li\u003e\n\u003cli\u003eThis Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines\u003c\/li\u003e\n\u003cli\u003eThere’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*It does not include an engine fitting\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Attwood Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 93806UUSD7\u003c\/li\u003e\n\u003cli\u003eUPC: 022697938275\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/98204QG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eQuick guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":46276657512517,"sku":"CWR-ATTW-93806UUSD7-Q1-1","price":110.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/98204XL.jpg?v=1793734420"},{"product_id":"attwood-marine-93806musd7-fuel-hose-fittings","title":"Attwood Marine 93806MUSD7 Attwood Mercury Fuel Line Kit - 3\/8\" Dia. x 6' Length with Fuel Demand Valve","description":"\u003cp\u003e\u003cstrong\u003eMercury Fuel Line Kit - 3\/8\" Dia. x 6' Length with Fuel Demand Valve\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis EPA-certified Attwood Mercury Fuel Line Kit reliably delivers fuel to your Mercury engine and provides the ultimate in performance, safety, and value. The kit comes with a 6-foot-long, 3\/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThese Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8896LP6\u003c\/li\u003e\n\u003cli\u003eIt also includes a multi-layer low-permeation primer bulb and a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine.\u003c\/li\u003e\n\u003cli\u003eHose and tank fittings come with pre-applied thread sealant\u003c\/li\u003e\n\u003cli\u003eFor Mercury engines and tanks\u003c\/li\u003e\n\u003cli\u003eTank Side: Universal Sprayless Quick-Connect\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Attwood Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 93806MUSD7\u003c\/li\u003e\n\u003cli\u003eUPC: 022697938244\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/98215QG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eQuick guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":46276747526213,"sku":"CWR-ATTW-93806MUSD7-Q1-1","price":117.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/98215XL.jpg?v=1793734574"},{"product_id":"attwood-marine-93806eusd7-fuel-hose-fittings","title":"Attwood Marine 93806EUSD7 Attwood Johnson\/Evinrude Fuel Line Kit - 3\/8\" Diameter x 6' Length with Fuel Demand Valve","description":"\u003cp\u003e\u003cstrong\u003eJohnson\/Evinrude Fuel Line Kit - 3\/8\" Diameter x 6' Length with Fuel Demand Valve\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis EPA-certified Attwood Johnson\/Evinrude Fuel Line Kit reliably delivers fuel to your Johnson or Evinrude engine and provides the ultimate in performance, safety, and value. The kit comes with a 6-foot-long, 3\/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Also, the kit includes a multi-layer low-permeation primer bulb and a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThese Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8889LP6\u003c\/li\u003e\n\u003cli\u003eIn-Line Fuel Demand Valve\u003c\/li\u003e\n\u003cli\u003eHose and tank fittings come with pre-applied thread sealant\u003c\/li\u003e\n\u003cli\u003eReliably delivers fuel to your Johnson or Evinrude engine\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Attwood Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 93806EUSD7\u003c\/li\u003e\n\u003cli\u003eUPC: 022697938053\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/98217QG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eQuick guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":46276747984965,"sku":"CWR-ATTW-93806EUSD7-Q1-1","price":117.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/98217XL.jpg?v=1793734575"},{"product_id":"attwood-marine-951606ulp7-fuel-hose-fittings","title":"Attwood Marine 951606ULP7 Attwood Universal Fuel Line Kit - 5\/16\" Diameter x 6' Length","description":"\u003cp\u003e\u003cstrong\u003eUniversal Fuel Line Kit - 5\/16\" Diameter x 6' Length\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 5\/16-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThis Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines.\u003c\/li\u003e\n\u003cli\u003eUniversal for any engines and tanks\u003c\/li\u003e\n\u003cli\u003eMulti-Layer, Low-Permeation Primer Bulb\u003c\/li\u003e\n\u003cli\u003e6 ft. x 5\/16 in. Low Permeation Hose\u003c\/li\u003e\n\u003cli\u003eReliably delivers fuel to your engine\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*No end fittings included\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Attwood Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 951606ULP7\u003c\/li\u003e\n\u003cli\u003eUPC: 022697951601\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/98202QG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eQuick guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":46349754007621,"sku":"CWR-ATTW-951606ULP7-Q1-1","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/98202XL.jpg?v=1794245040"},{"product_id":"attwood-marine-93812ulp7-fuel-hose-fittings","title":"Attwood Marine 93812ULP7 Attwood Universal Fuel Line Kit - 3\/8\" Diameter x 12' Length","description":"\u003cp\u003e\u003cstrong\u003eUniversal Fuel Line Kit - 3\/8\" Diameter x 12' Length\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your engine and provides the ultimate in performance, safety, and value. The kit includes a 12-foot-long, 3\/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e12' x 3\/8\" Low Permeation Hose\u003c\/li\u003e\n\u003cli\u003eThere’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance\u003c\/li\u003e\n\u003cli\u003eUniversal for any engines and tanks\u003c\/li\u003e\n\u003cli\u003eThis Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines\u003c\/li\u003e\n\u003cli\u003eReliably delivers fuel to your engine\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*No tank or engine fittings\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Attwood Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 93812ULP7\u003c\/li\u003e\n\u003cli\u003eUPC: 022697938121\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/98212QG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eQuick guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":46349755252805,"sku":"CWR-ATTW-93812ULP7-Q1-1","price":88.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/98212XL.jpg?v=1794245043"},{"product_id":"trident-marine-321-2126-ft-fuel-hose-fittings","title":"Trident Marine 321-2126-FT 2-1\/2\" Ocean-Flex Multipurpose Hose - Sold by the Foot","description":"\u003cp\u003e\u003cstrong\u003e2-1\/2\" Ocean-Flex Multipurpose Hose - Sold by the Foot\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis unique marine hose can be used for a multitude of applications for both Commercial and Recreational Vessels including Fuel Fill, Feed, and Vent (Diesel \u0026amp; Gasoline – Type A1), Lube Oil, Wet Exhaust, Water (Vital and Non-Vital), Bilge, Coolant, Drains, and Sanitation applications. OCEAN-FLEX boasts compliance with the following standards: USCG Inspected Vessels (Title 46 CFR Sub-Chap. T), SAE J1942 (Code F, VW, NVW), USCG Type A1, SAE J1527 A1 R2, SAE J2006 R2, SAE J20R2 B, SAE J20R4 B, SAE J20R5 B, SAE J30R5, ABYC H-22, H-24, H-33 P-1, P-4, ISO 7840 A1, ISO 8469 B1, ISO 13363 2B, and CE.\u003c\/p\u003e\u003cp\u003eProvides excellent resistance to fuel, fire, heat, cold, ozone, and aging. Also provides excellent bend-ability and adheres to more standards than any other marine hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstruction: Tube Black Nitrile, Cover Black Nitrile\u003c\/li\u003e\n\u003cli\u003eReinforcement: Multiple Textile Spirals, Dual Steel Wire Helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-29ºC to 100ºC)\u003c\/li\u003e\n\u003cli\u003eLengths: 12.5’ (3.81 m) Length, 25’ (7.62 m) Coil (4”–6”), 50’ (15.24 m) Coil (up to 3-1\/2” ID.)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003e  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Trident Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 321-2126-FT\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/107210QG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eQuick guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46349759512645,"sku":"CWR-TRID-321-2126-FT-Q1-1","price":73.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/107210XL.jpg?v=1794245051"},{"product_id":"attwood-marine-93806elp7-fuel-hose-fittings","title":"Attwood Marine 93806ELP7 Attwood Johnson\/Evinrude Fuel Line Kit - 3\/8\" Diameter x 6' Length (No Tank Fitting)","description":"\u003cp\u003e\u003cstrong\u003eJohnson\/Evinrude Fuel Line Kit - 3\/8\" Diameter x 6' Length (No Tank Fitting)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis Attwood Fuel Line Kit is a reliable replacement for the original equipment on Johnson and Evinrude engines and tanks. This kit includes a 6-foot-long, 3\/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThese Attwood Hose Fittings Are Included: Two (2) 8889LP6 hose fittings for the tank end and for the engine end\u003c\/li\u003e\n\u003cli\u003eFor Johnson\/Evinrude engines and tanks\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*No Fuel Demand Valve or Tank Fitting is included in this kit\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Attwood Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 93806ELP7\u003c\/li\u003e\n\u003cli\u003eUPC: 022697938169\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/98218QG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eQuick guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":46349766197317,"sku":"CWR-ATTW-93806ELP7-Q1-1","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/98218XL.jpg?v=1794245064"},{"product_id":"attwood-marine-93806ulp7-fuel-hose-fittings","title":"Attwood Marine 93806ULP7 Attwood Universal Fuel Line Kit - 3\/8\" Diameter x 6' Length","description":"\u003cp\u003e\u003cstrong\u003eUniversal Fuel Line Kit - 3\/8\" Diameter x 6' Length\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis Attwood Fuel Line Kit is a reliable universal replacement for the original equipment on any brand of engines and tanks. This kit includes a 6-foot-long, 3\/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cstrong\u003e:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3\/8\" x 6' Low Permeation Hose\u003c\/li\u003e\n\u003cli\u003eUniversal for any engines and tanks\u003c\/li\u003e\n\u003cli\u003eMulti-layer low-permeation primer bulb with 60% more fuel output compared to competitors\u003c\/li\u003e\n\u003cli\u003eReliably delivers fuel to your engine\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*Does not include fittings for the tank end and for the engine end\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Attwood Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 93806ULP7\u003c\/li\u003e\n\u003cli\u003eUPC: 022697938060\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/98208QG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eQuick guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":46349775306821,"sku":"CWR-ATTW-93806ULP7-Q1-1","price":67.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/98208XL.jpg?v=1794245076"},{"product_id":"trident-marine-321-2006-ft-fuel-hose-fittings","title":"Trident Marine 321-2006-FT 2\" Ocean-Flex Multipurpose Hose - Sold by the Foot","description":"\u003cp\u003e\u003cstrong\u003e2\" Ocean-Flex Multipurpose Hose - Sold by the Foot\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis unique marine hose can be used for a multitude of applications for both Commercial and Recreational Vessels including Fuel Fill, Feed, and Vent (Diesel \u0026amp; Gasoline – Type A1), Lube Oil, Wet Exhaust, Water (Vital and Non-Vital), Bilge, Coolant, Drains, and Sanitation applications. OCEAN-FLEX boasts compliance with the following standards: USCG Inspected Vessels (Title 46 CFR Sub-Chap. T), SAE J1942 (Code F, VW, NVW), USCG Type A1, SAE J1527 A1 R2, SAE J2006 R2, SAE J20R2 B, SAE J20R4 B, SAE J20R5 B, SAE J30R5, ABYC H-22, H-24, H-33 P-1, P-4, ISO 7840 A1, ISO 8469 B1, ISO 13363 2B, and CE.\u003c\/p\u003e\u003cp\u003eProvides excellent resistance to fuel, fire, heat, cold, ozone, and aging. Also provides excellent bend-ability and adheres to more standards than any other marine hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul style='box-sizing: border-box; border: 0px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-variant-numeric: inherit; font-variant-east-asian: inherit; font-variant-alternates: inherit; font-variant-position: inherit; font-variant-emoji: inherit; font-weight: 400; font-stretch: inherit; font-size: 14px; line-height: inherit; font-family: -apple-system, BlinkMacSystemFont, \"Segoe UI\", Roboto, \"Helvetica Neue\", Arial, sans-serif, \"Apple Color Emoji\", \"Segoe UI Emoji\", \"Segoe UI Symbol\"; font-optical-sizing: inherit; font-size-adjust: inherit; font-kerning: inherit; font-feature-settings: inherit; font-variation-settings: inherit; margin: 0px; padding: 0px; vertical-align: baseline; list-style: inside disc; color: rgb(33, 37, 41); letter-spacing: normal; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;'\u003e\n\u003cli\u003eConstruction: Tube Black Nitrile, Cover Black Nitrile\u003c\/li\u003e\n\u003cli\u003eReinforcement: Multiple Textile Spirals, Dual Steel Wire Helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-29ºC to 100ºC)\u003c\/li\u003e\n\u003cli\u003eLengths: 12.5’ (3.81 m) Length, 25’ (7.62 m) Coil (4”–6”), 50’ (15.24 m) Coil (up to 3-1\/2” ID.)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003e  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Trident Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 321-2006-FT\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/107206QG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eQuick guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":46362921500741,"sku":"CWR-TRID-321-2006-FT-Q1-1","price":60.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/107206XL.jpg?v=1794367510"},{"product_id":"attwood-marine-93038lp7-fuel-hose-fittings","title":"Attwood Marine 93038LP7 Attwood Primer Bulb - 3\/8\" Inner Diameter Hose","description":"\u003cp\u003e\u003cstrong\u003ePrimer Bulb - 3\/8\" Inner Diameter Hose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIt is intended for use with a 3\/8-inch interior diameter hose\u003c\/li\u003e\n\u003cli\u003eExclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters\/hour)\u003c\/li\u003e\n\u003cli\u003eEngineered hose barbs and stainless steel stepless clamps ensure leak-free performance\u003c\/li\u003e\n\u003cli\u003eThis bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Attwood Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 93038LP7\u003c\/li\u003e\n\u003cli\u003eUPC: 022697930385\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/98189QG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eQuick guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":46398492049477,"sku":"CWR-ATTW-93038LP7-Q1-1","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/98189XL.jpg?v=1794534574"},{"product_id":"attwood-marine-93516lp7-fuel-hose-fittings","title":"Attwood Marine 93516LP7 Attwood Primer Bulb - 5\/16\" Inner Diameter Hose","description":"\u003cp\u003e\u003cstrong\u003ePrimer Bulb - 5\/16\" Inner Diameter Hose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIt is intended for use with a 5\/16-inch interior diameter hose\u003c\/li\u003e\n\u003cli\u003eExclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters\/hour)\u003c\/li\u003e\n\u003cli\u003eEngineered hose barbs and stainless steel stepless clamps ensure leak-free performance\u003c\/li\u003e\n\u003cli\u003eThis bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Attwood Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 93516LP7\u003c\/li\u003e\n\u003cli\u003eUPC: 022697935168\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/98190QG.pdf\" target=\"_blank\" rel=\"noopener\"\u003eQuick guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":46398492475461,"sku":"CWR-ATTW-93516LP7-Q1-1","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/98190XL.jpg?v=1794534575"},{"product_id":"attwood-marine-93014lp7-fuel-hose-fittings","title":"Attwood Marine 93014LP7 Attwood Primer Bulb - 1\/4\" Inner Diameter Hose","description":"\u003cp\u003e\u003cstrong\u003ePrimer Bulb - 1\/4\" Inner Diameter Hose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIt is intended for use with a 1\/4-inch interior diameter hose\u003c\/li\u003e\n\u003cli\u003eExclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters\/hour)\u003c\/li\u003e\n\u003cli\u003eEngineered hose barbs and stainless steel stepless clamps ensure leak-free performance\u003c\/li\u003e\n\u003cli\u003eThis bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Attwood Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 93014LP7\u003c\/li\u003e\n\u003cli\u003eUPC: 022697931474\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":46398500601925,"sku":"CWR-ATTW-93014LP7-Q1-1","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/98191XL.jpg?v=1794534593"},{"product_id":"attwood-marine-8838us6-fuel-hose-fittings","title":"Attwood Marine 8838US6 Attwood Universal Sprayless Connector - Male \u0026 Female","description":"\u003cp\u003e\u003cstrong\u003eUniversal Sprayless Connector - Male \u0026amp; Female\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSafely eliminate dangerous spraying of fuel when connecting or disconnecting pressurized hoses during fueling or maintenance. Comes complete with a thread-sealer for fast, easy installation; no additional supplies are required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e8838HF6 Female Hose Fitting and 8838TM6 Male Threaded Tank Fitting\u003c\/li\u003e\n\u003cli\u003ePre-applied fuel-grade thread sealant prevents fuel leaks\u003c\/li\u003e\n\u003cli\u003eInclude check valves that automatically close upon disconnecting\u003c\/li\u003e\n\u003cli\u003eHigh fuel flow fitting (less than .25kPa restriction at 50 liters\/hour)\u003c\/li\u003e\n\u003cli\u003eCompatible with Ethanol blended fuels\u003c\/li\u003e\n\u003cli\u003eHigh-strength body engineered to withstand tough marine environments\u003c\/li\u003e\n\u003cli\u003ePre-applied fuel-grade thread sealant prevents leaks and saves you time\u003c\/li\u003e\n\u003cli\u003eCompatible with 3\/8 inch fuel lines, Ethanol blended fuels, and all original equipment manufacturer (OEM) brand engines\u003c\/li\u003e\n\u003cli\u003eCan be used with portable generators and other portable fuel tanks\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*Meets all EPA and CARB (California Air Resources Board) requirements\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: Attwood Marine\u003c\/li\u003e\n\u003cli\u003ePart number: 8838US6\u003c\/li\u003e\n\u003cli\u003eUPC: 022697883865\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":46398510432325,"sku":"CWR-ATTW-8838US6-Q1-1","price":48.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/0223\/5205\/files\/98198XL.jpg?v=1794534612"}],"url":"https:\/\/supplymount.com\/collections\/fuel-hose-fittings.oembed","provider":"SupplyMount","version":"1.0","type":"link"}